Penn State Behrend
    School of Engineering
    5101 Jordan Road
    Erie, PA  16563-1701

    Office: REDC 251
    Phone: (814) 898-6388
    Fax: (814) 898-6125
    Email: axk@psu.edu

Amir Khalilollahi
Publications

Khalilollahi, A., Johnson, D., and Roth, J., “A comparative multi-field FEA and experimental study on the enhanced manufacturability of 6061-T6511 aluminum using DC current,” submitted to the Journal of Manufacturing Science and Engineering, 21 pp., December 2006.

Khalilollahi, A., Johnson, D., and Roth, J., “Multi-field FE modeling of resistive heating in a 6061-T6511 aluminum specimen,” Proceedings of IMECE: ASME International Mechanical Engineering Congress and Exhibition, #IMECE2006-15677, Chicago, IL, November 2006.

Onipede, O., Khalilollahi, A., and Sunealitis, K., “Vibration of micro beams and plates in electrostatic fields,” Proceedings of the Seventh World Congress on Computational Mechanics, Los Angeles, CA, July 2006.

Khalilollahi, A., “Harmonic analysis of a multilayer ECB using frequency independent damping,” 14th International Conference on Composite Engineering, Boulder, Co, (Proceedings on CD), July 2006.

Warley, R., Khalilollahi, A., and Roth, J., “Use of coupled field FE modeling in study of resistive heating in a 6061-T6511 aluminum specimen,” Proceedings of the 2006 International ANSYS Conference, 8 pp., Pittsburgh, PA, May 2006.

Khalilollahi, A., Warley, R., and Onipede, O., “Parametric modal study of multilayer composite electronic boards,” [best paper in session award] Proceedings of the 2006 International ANSYS Conference, 11 pp., Pittsburgh, PA, May 2006.

Khalilollahi, A., Warley, R., and Onipede, O., “Thermal reliability design and optimization for multilayer composite electronic boards,” Proceedings of IMECE: ASME International Mechanical Engineering Congress and Exhibition, IMECE2005-82560, Orlando, FL, November 2005.

Onipede, O., Khalilollahi, A., Adeev, I., and Bunziewicz, L., “Vibrational characteristics of micro beams,” Proceedings of IMECE: ASME International Mechanical Engineering Congress and Exhibition, IMECE2005-79560, Orlando, FL, November 2005.

Khalilollahi, A., and Warley, R., “Thermal stress reduction and optimization for orthotropic composite boards,” Proceedings of 2005 ASME Summer Heat Transfer Conference, HT2005-72570, San Francisco, CA, July 2005.

Khalilollahi, A., and Onipede, D., “Stress evaluation of composite springs using dynamical state space modeling,” 11th International Conference on Composite Engineering, Hilton Head, SC, (Proceedings in CD), Aug. 2004.

Onipede, D., and Khalilollahi, A., “Stresses response of a vibrating thick/sandwich beam using a reduced dynamic model stress evaluation of composite springs using dynamical state space modeling,” 11th International Conference on Composite Engineering, Hilton Head, SC, (Proceedings in CD), Aug. 2004.

Khalilollahi, A., “Finite element stress evaluation of a composite board using 2-D and 3-D convection models,” 2004 International ANSYS Conference, Pittsburgh, PA, (Proceedings in CD), May 2004.

Khalilollahi, A., and Turso, J., “Dynamical state-space modeling of composite spring boards,” Proceedings of the Tenth Annual International Conference on Composite Engineering, pp. 739-740, July 2003.

Khalilollahi, A., and Torab, H., “Design optimization of heater grid plates,” Proceedings of ASME Summer Heat Transfer Conference, paper #HT2003-47205 (CD format-5 pages), July 2003.

Khalilollahi, A., Felker, B. P., and Wetzel, J. W., “Non-linear elastomeric spring design using Mooney-Rivlin constants,” Proceedings of 2002 ANSYS Users Conference and Exhibition, paper #146 (conference CD), 2002.

Khalilollahi, A., “Finite element evaluation of thermal stresses in a composite circuit board cooled by mixed confection,” Proceedings of 2002 ANSYS Users Conference and Exhibition, paper #144 (conference CD), 2002.

Khalilollahi, A., and Mahajerin, E., “Finite element evaluation of temperature and stress distributions,” Proceedings of Seventh International Conference on Composite Engineering, pp. 437-439, 2000.

Cupillari, A., and Khalilollahi, A., “An application of fluid dynamics in the calculus classroom,” Proceedings of 1999 ASEE North Central Meeting, pp. 217-221, 1999.

Cupillari, A., and Khalilollahi, A., “Interaction of fluids and mathematics: A classroom study,” PRIMUS, vol. VIII, no. 3, pp. 229-239, 1998.

Joshi, H. M., and Khalilollahi, A., “Transient and steady state solutions for laminar flow over a finite thickness fin in a parallel plate channel,” Proceedings of ASME 25th National Heat Transfer Conference, Houston, TX, vol. 1, pp. 439-444, 1998.

Gardner, J., Khalilollahi, A., Gunshore, P., and Kuhn, J., “Modeling for design of conical swaging dies,” Proceedings of the IASTED/ISMM International Conference, pp. 163-166, 1997.

Lasher, W. C., Khalilollahi, A., Young, J. H., and Vahdati, N., “A design model for fluid-tuned mounts developed using CFD,” Computer Modeling and Simulation in Engineering, vol. 2, no. 3, pp. 227-242, 1997.

Gardner, J., Khalilollahi, A., Gunshore, P., and Kuhn, J., “Modeling for design of conical swaging dies,” Proceedings of the International Modeling and Simulation Conference, 16 pp., 1996.

Holliday-Darr, K., Young, J. H., Lasher, W. C., Evans, E. R., Beaumont, J., Ford, R., Khalilollahi, A., and Hemminger, T. L., “An innovative approach to incorporating design into the freshman year,” Proceedings of the ASEE 1995 Annual Conference, Anaheim, CA, pp. 2055-2059, 1995.

Lasher, W.C., Khalilollahi, A., Vahdati, N., and Young, J. H., “Prediction of pressure drop in finite geometries with periodic flow,” Proceedings of the ASME Fluids Engineering Division Summer Meeting, Hilton Head, SC, #FED.  207:207-214, 1995.

Khalilollahi, A., “Thermal analysis of heater grid plates,” Proceedings of the IASTED International Conference on Modeling and Simulation, pp. 202-205, 1995.

Khalilollahi, A., and Torab, B., “Opposing mixed convection near discretely heated boards,” Proceedings of the Second Biennial ASME/European Joint Conference on Engineering Systems Design and Analysis, ASME Pub. PD1-64-1, pp. 7-12, 1994.

Khalilollahi, A., Lasher, W. C., and Weckerly, D.E., “Mathematical modeling of fluid-filled isolator mounts,” International Journal of Modeling and Simulation, vol.14, no. 4, pp. 79-184, 1994.

Khalilollahi, A, “Mixed convection heat dissipation of in-line finite thickness fins,” Bulletin of the American Physical Society, vol. 38, no. 7, pp. 1654, 1993.

Khalilollahi, A., “Solution of mixed  convection heat transfer from isothermal in-line fins,” Proceedings of (NASA) 5th Annual Thermal and Fluids Analysis Workshop, Brook Park, OH, pp. 127-136, 1993.

Lasher, W.C., Khalilollahi, A., Mischler, J., and Uhric, T., “Prediction of pressure drop in fluid tuned mounts using analytical and computational techniques,” Proceedings of (NASA) 5th Annual Thermal and Fluids Analysis Workshop, Brook Park, OH, pp. 111-126, 1993.

Mischler J., Lasher, W. C., and Khalilollahi, A., “Mathematical modeling flow resistance in fluid tuned isolators,” Bulletin of the American Physical Society, vol. 38, no. 7, pp. 1654, 1993.

Khalilollahi, A., Torab, H., and Sammakia, B., “Transient mixed convection from an array of uniform flex components,” Proceedings of ASME 1992, Engineering Systems Design Conference, ASME Pub. PD-VOL-47-3, pp. 1-4, 1992.
                               
Khalilollahi, A., and Sammakia, B., “The thermal capacity effect on transient mixed convection over heated components,” Proceedings of the ASME-Winter Annual Meeting, ASME Pub. 91-WA-EEP-40, pp. 1-7, 1991.

Khalilollahi, A., and Sammakia, B., “The thermal capacity effect upon transient natural convection in a rectangular cavity,” Journal of Electronic Packaging, ASME, vol. 112, no. 4, pp. 357-366, 1990.

Khalilollahi, A., and Sammakia, B., “Transient convection adjacent to discrete components in the presence of a weak opposing pressure field,” Proceedings of ASME Winter Annual Meeting, ASME Publication #90-WA/EEP-44, pp. 1-6, 1990.

Khalilollahi, A., “Code development and analysis of combined radiation and conduction through multiple shields,” Proceedings of ISMM Conference on Computer Application in Design, Simulation and Analysis, pp. 321-324, 1990.

Khalilollahi, A., and Stainbrook, N., “Vacuum furnace partial pressures can influence power input requirements,” Industrial Heating, pp. 36-40, 1989.

Khalilollahi, A., “Transient combined free and forced convection over two in-line isothermal rectangular fins,” Proceedings of Fourth International Conference on Computational Methods and Experimental Measurements, Capri, Italy, pp. 429-438, 1989. 

Khalilollahi, A., and Sammakia, B., “Transient mixed convection in air adjacent to discrete uniform flux heat sources,” Proceedings of ASME Winter Annual Meeting, ASME Publication #HTD, vol. 121, pp. 55-60, 1989.

Khalilollahi, A., and Sammakia, B., “Transient natural convection near a uniform flux surface with appreciable heat capacity,” International Communications in Heat and Mass Transfer, vol. 15, pp. 303-313, 1988.

Khalilollahi, A., “Evaluation of an approximate marching type method for the solution of steady flow over a rectangular fin,” Proceedings of the IASTED International Symposium on Applied Simulation and Modeling, Galveston, TX, pp. 246-249, 1988. 

Khalilollahi, A., “Transient free boundary layer near a heated vertical plate in a rectangular cavity,” International Journal of Modeling and Simulation, vol. 8, no. 4, pp. 114-118, 1988.

Khalilollahi, A., “Enclosure wall effects on the free convection boundary layer about a uniformly heated vertical plate,” Proceedings of the IASTED International Symposium on Applied Identification, Modeling and Simulation, New Orleans, LA, pp. 108-111, 1987.  

Khalilollahi, A, “A study of flow through stenoses with different severities,” Proceedings of 39th Annual Conference Med. and Biol., Baltimore, MD, pp. 299, 1986.

Khalilollahi, A., and Sammakia, B., “Unsteady natural convection generated by a heated surface within an enclosure,” Journal of Numerical Heat Transfer, vol. 9, no. 6, pp. 715-730, 1986.

Khalilollahi, A., “Unsteady blood flow through stenosed arteries,” Proceedings of the Joint ASCE/ASME Mechanics Conference - Forum on Unsteady Flows in Biological Systems, Albuquerque, NM, pp. 103-106, 1985.
                               
Khalilollahi, A., and Sammakia, B., “Transient natural convection generated by a hot vertical surface within an enclosure,” Proceedings of the IASTED International Conference on Applied Identification, Modeling and Simulation, New Orleans, LA, pp. 141-145, 1984.

Khalilollahi, A., and Sharma, M. G., “Numerical analysis of blood flow through stenosed arteries,”  Proceedings of the IASTED International Conference on Applied Identification, Modeling and Simulation, New Orleans, LA, pp. 167-171, 1984.

Khalilollahi, A., and Sharma, M. G., Analysis of flow through stenosed blood vessels, in Mathematical Modeling in Science and Technology, Pergamon Press, (eds.) J. Xavier, R. Avula, R. E. Kalman, A. I. Liapis, and E. Y. Rodin, 1983, pp. 703-708.