Navigation:
Plastics Training Academy Workshops and Seminars:
Alphabetical List of 2010 Training
- Color, Color Science and the Coloring of Plastics
March 24-25, 2010; October 19-20, 2010
$1,095
Jack Ladson
Designed to teach participants the fundamentals of Color, Color Science and the Coloring of Plastics..
- Design of Experiments for Injection Molding
June 2-4, 2010
$1,295
Brad Johnson
Design experiments and mold the parts, measure the characteristics being analyzed, and interpret the results. When experiments are correctly set up and carried out, they can provide information to facilitate the production of high-quality parts.
- Geometric Dimensioning and Tolerancing
February 24, 2010
$1,095
Donald Day
Designed to teach participants how to deal with process effects, such as draft, parting lines, ejectors, and gates on the engineering drawing and in the CAD file.
- Injection Mold Design Principles
June 24-25, 2010
$1,095
Jason Williams
Teaches how to design for competitiveness through proven concepts for mold manufacturing technology. Offers a thorough review of the fundamental mold design requirements and concentrates on the design elements that are necessary to produce a sound operational injection mold.
-
Injection Molded Part Design Principles
June 22-23, 2010
$1,095
Jon Meckley
Provides an overview of plastic part design, material shrinkage and flow characteristics, mold design, and the injection molding process. Explains the causes of and solutions to many unexpected problems. Teaches participants how to recognize whether part design, material, runner design, gate location, process, or mold design is the source of a problem.
- Injection Molding Principles
March 8-10, May 11-13, August 2-4, 2010
$1,295
Brad Johnson
Offers a thorough understanding of injection molding basics and terminology and includes diagnosis and discussion of problem parts. Approximately half of this workshop is hands-on molding exercises.
- Injection Molding Troubleshooting
March 10-12, August 4-6, 2010
$1,295
Brian Young
Provides hands-on experience in solving common molding problems in the processing lab. Teaches the theory behind the solutions and problem-solving strategies in the classroom.
- Introduction to Plastics Engineering Technology (Online)
September 10, 2010 (ten weeks)
$695
Brian Young
The 10-week online course will introduce the participant to fundamental concepts and properties of plastic materials and the influence of chemical structure on polymer properties. It will also introduce the participants to the primary types of plastic processes used in industry today. The participants will gain a better understanding of plastic materials and their importance in today's society.
- Liquid Injection Molding Silicones via Scientific Molding
May 3-5, 2010
$1,345
John Bozzelli
- Mold Maintenance and Mold Setting Principles
May 11-12, 2010
$1,095
Brian Young
- Penn State Injection Molding Certificate I
May 24-28, 2010; June 21-25, 2010
Brad Johnson and Brian Young
- Penn State Injection Molding Certificate II
July 19-23, 2010
Brad Johnson and Brian Young
- Penn State Injection Molding Certificate III
August 16-20, 2010
Brad Johnson and Brian Young
- Plastic Material Selection and Troubleshooting
September 13-15, 2010
$1,345
M. Sepe
Gain a better appreciation of how material properties affect part quality and performance. This seminar can benefit any persons seeking to improve their knowledge of plastic materials.
- Plastic Part Failure Analysis
September 16-17, 2010
$1,095
M. Sepe
- Process Validation for Medical Injection Molding
May 19-20, 2010
$1,095
S. Tucker
Covers the basic requirements for process validation in an FDA-regulated environment. At the end of the day, participants should be able to apply the concepts to their own processes.
- Process Capable Tolerancing
April 8, 2010
$650
Donald Day
Designed to explain the statistical concepts behind the process capability index Cpk and its importance to engineers and designers as well as provide an overview of the Process Capable Tolerancing methodology and a demonstration of the Tolerancing Capability Expert (TCE) software.
- The Science of Mold and Part Design Optimization
July 27-28, 2010
$1,095
John Beaumont
This two-day seminar is designed for anyone involved with the development and production of plastics products or molds. This includes part designers, mold designers, and process engineers and technicians. The seminar is also well suited to managers, technical sales,and quality control personnel, as it teaches the fundamental understanding of the effects of plastic flow on the molding process, tooling design, and part design.
*We strongly recommend the purchase of the corresponding textbook since the seminar material is based on information presented in the book. Runner and Gating Design Handbook: Tools for Successful Injection Molding by John Beaumont
- Thermoplastic Materials and Testing
May 13-14, 2010
$1,095
Brian Young
Provides a comprehensive understanding of the common ASTM tests found on a standard material data sheet. The workshop is designed to familiarize participants with many of the actual tests through a hands-on lab portion that points out the strengths and weaknesses of the individual tests. Participants can gain a better understanding of the values presented when comparing materials and become better informed as to how those values can be applied.